8D.2.9 Lot Dimensions
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Bear River City code is at https://www.bearrivercityutah.gov/city-ordinances/.
Text pulled 2026-10-19 from this source.
Partial copy: chapters 1, 2, 3, 7 (the zone districts) and 10 are scanned images on the city's site and are not included. Use the official code for those.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Bear River City planning before you rely on it.
Lot dimensions shall comply with the minimum standards of the Land Management and Development Code. In general, side lot lines shall be at right angles to street lines (or radial to curving street lines). Dimensions of corner lots shall be large enough to allow for erection of buildings, observing the minimum front-yard setback from both streets. Depth and width of properties reserved or laid out for business, commercial, or industrial purposes shall be adequate to provide for the off-street parking and loading facilities required for the type of use and development contemplated, as established in this Code.
8D.2.8 Staggered Front Set-Backs · 8D.2.10 Double Frontage Lots