8D.3.12 Road Surfacing and Improvements
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Bear River City code is at https://www.bearrivercityutah.gov/city-ordinances/.
Text pulled 2026-10-19 from this source.
Partial copy: chapters 1, 2, 3, 7 (the zone districts) and 10 are scanned images on the city's site and are not included. Use the official code for those.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Bear River City planning before you rely on it.
After Sewer and Water and other applicable utilities have been installed by the developer, the applicant shall surface or cause to be surfaced roadways to the widths prescribed in the pertinent regulations. Said surfacing shall be of such character as is suitable for the expected traffic. Types of pavement shall be determined by the City Engineer and Appropriate City Official.
The developer may apply for construction of curbs and gutters and other improvements or improvements may be required by the Planning Commission or City Council. After receiving design approval, installation shall be made prior to road surfacing. Adequate provision shall be made for culverts, drains and bridges. All road pavement, shoulders, drainage improvements and structures, curbs, turnarounds, and sidewalks shall conform to all construction standards and specifications adopted by the City and shall be incorporated into the construction plans required to be submitted by the developer for plat approval. All construction shall be designed and performed in accordance with the Bear River City Public Works Construction Standards.
8D.3.11 General Design Standards · 8D.3.13 Excess Right-of-Way Right-of-Way