9-12-12 BRIDGE AND TUNNEL REGULATIONS
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Brian Head code is at https://brianheadtown.utah.gov/town-code/.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Brian Head planning before you rely on it.
The design of bridges and/or tunnels shall conform to the following regulations:
A. Design Plans: All bridges and tunnels must be detailed in design plans submitted to the Land Use Authority for its review and comply with chapter 8 of this title, as applicable.
B. State Code Compliance: Highway bridge abutments shall comply with state code.
C. Retaining Wall Applicability: All wing walls and bridge abutments shall be constructed in conformity with the retaining wall section of this code (section 9-12-11 of this chapter).
(ord.08-016, 8-12-2008)
D. Exception: Foot bridges and private vehicles bridges shall be reviewed and approved by the Planning and Building department in conjunction with the single-family dwelling approval per Chapter 8 of this title. (ord. 15-018, 12-82-15, amd. ord. 24-014, 10-8-24)
9-12-11 CUTS, FILLS AND RETAINING WALLS · 9-12-13 WATERWAYS, DRAINAGES AND FLOOD HAZARD AREAS