9-9-5 SUBDIVISION BY METES AND BOUNDS

A. Purpose: The intent of subdivision by metes and bounds is to streamline the subdivision review and approval process for previously unsubdivided parcels in coordination with the existing utilities and public infrastructure where no more than ten (10) residential parcels or no more than two (2) commercial parcels will result from the subdivision. (2010 Code, amd. ord. 21-005, 05-11-2021) B. Standards for Review: When the applicant is prepared to record or sell specific parcels of property not previously subdivided, they must demonstrate to the satisfaction of the Town the following: 1. The proposed parcels conform to the previously approved General Plan and this title; 2. No additional public utilities or infrastructure are required to provide adequate public service to the newly divided lots; (ord. 21-005, 05-11-2021) 3. The utility and/or vehicular access to remaining undeveloped property will not be impaired; 4. The proposed parcels will have access to existing necessary utilities; 5. That remnant parcels which did not previously exist are not created which, due to size, configuration, or location, do not meet current zoning requirements and/or are not able to be developed; and 6. The proposed subdivision meets the criteria for exemption from the plat requirement set forth by the Utah Code Annotated §10-9a-605 et. seq. (amd. ord. 24014, 10-8-24) C. Review Process: Subdivisions which qualify under this section shall be considered under the Minor Plat Amendment process described in § 9-9-3 (C) of this title.