17.23.020 SIGN STANDARDS
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Cache County code is at https://www.cachecounty.gov/assets/department/clerk/cachecountyut-ut-2.pdf.
Text pulled 2026-10-19 from this source.
Titles 16 and 17 only, from the PDF on the county's own website (prepared by its code publisher; publisher notes removed).
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Cache County planning before you rely on it.
The following table contains the minimum sign standards which shall apply to all proposed signs:
Sign Standards
Zone A
FR-40
C
IM
ME
RR
Sign Standards
Freestanding Signs Maximum sign area Maximum height
Minimum setback from road right of way line (measurement of setback shall be based on future road right of way width)
Zone
A
12 square feet
10 feet
The leading edge of all signs shall be set back 1 foot from property lines and located outside any clear view area
Approval procedure
Permitted use shall receive a zoning clearance, sign sticker and building permit
Building Signs
Maximum sign area (total sign area per building)
20 percent of wall area not to exceed 24 square feet
Maximum height
No portion of a building sign shall extend above the eave of the building
Approval procedure
Permitted use shall receive a zoning clearance, sign sticker and building permit
Directional Signs Maximum sign area Maximum height
Minimum setback from road right of way line (measurement of setback shall be based on future road right of way width)
10 square feet
10 feet
The leading edge of all directional signs shall be set back 1 foot from property lines and located outside any clear view area
FR-40
C
IM
ME
RR
12 square feet
10 feet
The leading edge of all signs shall be set back 1 foot from property lines and located outside any clear view area
Permitted use shall receive a zoning clearance, sign sticker and building permit
60 square feet
20 feet
The leading edge of all signs shall be set back 1 foot from property lines and located outside any clear view area
Permitted use shall receive a zoning clearance, sign sticker and building permit
60 square feet
20 feet
The leading edge of all signs shall be set back 1 foot from property lines and located outside any clear view area
Permitted use shall receive a zoning clearance, sign sticker and building permit
Not to exceed 12 square feet
No portion of a building sign shall extend above the eave of the building
Permitted use shall receive a zoning clearance, sign sticker and building permit
20 percent of wall area not to exceed 60 square feet
No portion of a building sign shall extend above the eave of the building
Permitted use shall receive a zoning clearance, sign sticker and building permit
20 percent of wall area not to exceed 60 square feet
No portion of a building sign shall extend above the eave of the building
Permitted use shall receive a zoning clearance, sign sticker and building permit
10 square feet
10 feet
The leading edge of all directional signs shall be set back 1 foot from property lines and located outside any clear view area
10 square feet
10 feet
The leading edge of all directional signs shall be set back 1 foot from property lines and located outside any clear view area
10 square feet
10 feet
The leading edge of all directional signs shall be set back 1 foot from property lines and located outside any clear view area
Per development agreement
Per development agreement
Approval procedure
Conditional use and: 1) shall provide evidence, and must maintain a valid business license for a business located in the unincorporated county; 2) an agreement with the owner of the property where the directional sign is proposed to be located; and 3) receive approval from county road department or UDOT, as applicable