5.6 APPROVAL REQUIRED FOR LOT DIVISION
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Castle Valley code is at https://castlevalleyutah.gov/documents/ordinances.php.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Castle Valley planning before you rely on it.
To preserve the rural characteristic of the Town of Castle Valley through low density development
and the health standards of the Town of Castle Valley through reasonably spaced water and septic systems, approval by the Town Council will be required before any legally platted lot in the Town can be divided. Such a division will only be considered for the purpose of adding the divided sections to existing lots of five (5) acres (including easements) or more, and no remnant will be less than five (5) acres (including easements). A Lot Line Adjustment (Boundary Adjustment) that does not create a new additional lot is not a Lot Division, and therefore does not require review or approval by the Town Council pursuant to sections 10-9a-523 and 10-9a-524, et seq., UCA. Combining two or more legally platted lots into one legally platted lot requires review and approval from the Town Council and shall not be allowed if it makes a property noncompliant with any Town Land Use Regulations such as the maximum square footage limit per legally platted lot. Property owners are required to give the Town notice after any Boundary Adjustment has occurred along with a copy of any surveys performed.
5.5 ONLY ONE SINGLE-FAMILY DWELLING PER PLATTED LOT · 5.7 ALL BUILDINGS AND CERTAIN LAND DISTURBANCE ACTIVITIES MUST BE PERMITTED