2-5-4.3 Development Standards
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Cleveland code is at http://www.clevelandtown.org/planning--zoning.htm.
Text pulled 2026-10-19 from this source.
Zoning ordinance only; the subdivision ordinance is a scanned image on the town's site and is not included.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Cleveland planning before you rely on it.
All structures shall be set back no less than twenty (25) feet from any property line or any street whichever is greater. All setbacks must meet adopted building and fire code requirements.
A. No side or rear setbacks are required for the interior sides and rear of lots except that when located adjacent to a residential zone, all buildings shall be set back not less than eight (8) feet.
B. No minimum area shall be required except that the area is sufficient to accommodate the use being applied for.
C. No frontage requirement is required except that each use shall have access to a public road.
D. Additional height may be granted for buildings and structures provided that for each additional one (1) foot increase in height the building or structure shall be set back an additional one (1) foot.
Lot Type Industrial
Area
Frontage
Setbacks
(see above)
(see above)
Front: 25' Side: 0' (see above) Side Corner lot: 25' Rear: 0’ (see above)
Height Restrictions
(30') or 2 stories. Additional height may be granted (see above)