8.32.08 Road Standards
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Daniel code is at https://danielutah.gov/code-and-ordinances/.
Text pulled 2026-10-19 from this source.
Title 8 only; a separate 2025 subdivision amendment ordinance is not merged in.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Daniel planning before you rely on it.
Figure 1
Figure 2
Note: On slopes greater than 3:1 there must be a minimum of eight (8) feet from the edge of the pavement unless there is a guardrail, which must be set back a minimum of four (4) feet from the edge of the pavement.
Figure 3
Figure 4
Note: On slopes greater than 3:1 there must be a minimum of eight (8) feet from the edge of the pavement unless there is a guardrail, which must be set back a minimum of four (4) feet from the edge of the pavement.
Figure 5
Figure 6
Note: On slopes greater than 3:1 there must be a minimum of eight (8) feet from the edge of the pavement unless there is a guardrail, which must be set back a minimum of four (4) feet from the edge of the pavement.
Figure 7
Figure 8
Note: On slopes greater than 3:1 there must be a minimum of eight (8) feet from the edge of the pavement unless there is a guardrail, which must be set back a minimum of four (4) feet from the edge of the pavement.
Figure 9
Figure 10
Note: On slopes greater than 3:1 there must be a minimum of eight (8) feet from the edge of the pavement unless there is a guardrail, which must be set back a minimum of four (4) feet from the edge of the pavement.
Figure 11
Note: On slopes greater than 3:1 there must be a minimum of eight (8) feet from the edge of the pavement unless there is a guardrail, which must be set back a minimum of four (4) feet from the edge of the pavement.
8.32.07 General Road Design Standards · 8.32.09 Appendix A to Title 8.32