11C-1503 C2 Zone
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Garden City code is at https://www.gardencityutah.gov/code.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Garden City planning before you rely on it.
A. Permitted Uses. 1. Carpenter shops, electrical, plumbing, heating and air conditioning shops, printing and publishing or lithographic shops, provided all uses shall be within an enclosed building 2. Commercial landscaping buildings 3. Storage Facility (Can be no closer than 300’ to Hwy 89, SR 30 or 300 West) 4. Construction/labor/service showrooms, provided all uses shall be within an enclosed building 5. Small scale manufacturing provided, all uses shall be within an enclosed building. 6. Lumber yard, provided all uses shall be within an enclosed building.
7. A single-family residence and/or employee housing as long as construction is integrated into the commercial structure and is 50% or less of the total square footage and must be located either above or behind the commercial space.
B. Conditional Uses. 1. Automobile service stations for garages for repair of vehicles 2. Farmer’s & Artisan’s Market 3. RV Park 4. Stand Alone Accessory Building (Can be no closer than 300’ to Hwy 89, SR 30 or 300 West) 5. Commercial parking lots 6. Front Setbacks and Side Setbacks may be reduced as a Conditional Use. 1. Must be applied for as a Conditional Use and approved by the Planning Commission and the Town Council. 2. Building side walls shall meet building code requirements for attached buildings. 3. Shall provide access to the rear of the building for fire protection. 4. Front setback may be reduced if it allows for foot traffic to exit the path of travel.
C. Non-Listed Uses see Ordinance #11C-1005