20.05.24 ROAD STANDARDS
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Genola code is at https://genolaut.gov/zoning-code/.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Genola planning before you rely on it.
1. Roadway shall be grubbed to a depth of 12 inches minimum.
2. Any and all roads to be constructed are required to have a soil sample to determine the amount of structural fill needed, with a minimum of 12 inches required.
3. A minimum of six (6) inches state spec road base is required to cover structural fill.
4. Upon completion of subgrade and road base, a compaction test will be required at random intervals to be decided by Public Works Director and/or Town Engineer and not to exceed four (4) every five hundred (500) lineal feet.
5. There shall be no utilities installed within the Town right-of-way except for culinary water. Special conditions will need approval from the Town Public Works Director and the Town Council.
6. Any excavation in the roadway shall be compacted in six (6) inch lifts and a compaction test is required.
7. Power, phone and secondary water are to be installed in the public utility easement.
8. A two percent (2%) grade is required from the crown to the road edge. (See Standard Drawing 7).
9. A minimum of three (3) inches of asphalt is required.
10. Upon completion of asphalt, road bases shall be imported to raise shoulder elevation flush with the asphalt.
11. All signage must meet engineer grade or higher.
12. The Public Works Director will assign size and locations for sign placement.
20.05.23 WATER STANDARDS · 20.05.25 RIGHT TO AGRICULTURAL ACTIVITIES