10-6 Determinations for Enforcement of Performance Standards
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Kanab code is at https://kanab.utah.gov/DocumentCenter/Index/96.
Text pulled 2026-10-19 from this source.
Use charts in chapters 16-20 do not copy cleanly. Check the official code for those charts.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Kanab planning before you rely on it.
The determination of the existence of dangerous and objectionable elements shall be made at the location of the use creating the same and at any points where the existence of such elements may be most apparent; provided, however, that the measurements having to do with noise, odors, vibration, or glare shall be taken at the following points of measurement: A. In any district, except a Manufacturing District, at the lot-line of the establishment
or use. B. In a Manufacturing District at one or more points five hundred (500) feet from the
establishment or use, or at the boundary or boundaries of the District, if closer to the establishment or use, or at the closest point within an adjacent district other than a Manufacturing District.
10-5 Nonconforming Uses · 10-7 Dangerous and Objectionable Elements