18-8 Sale of Individual

dwelling units A. In the RM zone condominium or townhome projects with at least four (4) dwelling units may be platted for the sale of individual dwelling units, subject to the following standards: 1. Rather than individual building lots, the project is platted with private building pads or ownership space for condominium projects, and land outside the private building pad or space is designated as common and/or limited common areas. A homeowners’ association is established to maintain the common areas. 2. Density shall not exceed the requirements of the Kanab Land Use Ordinance in terms of open space, parking, landscaping, building height, and maximum building coverage. 3. The minimum lot size and width requirements set forth in Section 18-5 apply to the entire project rather than to individual platted dwelling units. 4. Building separation shall be a minimum of 20’ between buildings for 2-story or higher buildings, and a minimum separation of 10’ between buildings for 1-story buildings where no lot lines exist between buildings, but rather the area is designated as common area. Setbacks from lot boundary lines for buildings shall be as set forth in Section 18-5 and 18-6. B. Each unit of a Side-By-Side two-family dwelling may be platted and sold separately, provided the units are attached and meet the building code requirements for separate ownership and each resulting lot area has a minimum of four thousand (4,000) square feet and minimum of forty (40) feet of frontage on a public road. June 8, 2021 - 5 - Each unit shall have its own water and power meters, and separate sewer lateral. June 8, 2021 - 6 -