Utah Zoning

Team Utah Commercial · brokered by RE/MAX Associates · not a government website

Call 801-664-3370

Kanab zoning code

6-5 Access Requirements

Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build. The official Kanab code is at https://kanab.utah.gov/DocumentCenter/Index/96. Text pulled 2026-10-19 from this source. Use charts in chapters 16-20 do not copy cleanly. Check the official code for those charts. Tables (like use tables) may not copy cleanly, so check any table against the official code. Confirm anything here with Kanab planning before you rely on it.
Adequate ingress and egress to and from all uses shall be provided as follows: A. Residential Lots a. Residential lots with less than one hundred (100) feet of street frontage shall have not more than two (2) driveways, each of which shall be a maximum of twenty-five (25) feet wide at the street lot line, or one (1) driveway with a maximum of 50 feet wide at the street lot line. Driveways shall not be closer than six (6) feet to each other. b. Residential lots with more than one hundred (100) feet of street frontage are allowed one additional driveway for each additional fifty (50) feet of street frontage, each of which shall be a maximum of twenty-five (25) feet wide at the street lot line, or one (1) driveway with a maximum of fifty (50) feet wide at the street lot line. Driveways shall not be closer than six (6) feet to each other. c. Circular driveways shall count as one (1) driveway. B. Other than Residential lots - Access for each lot shall be provided to meet the following requirements: 1. Not more than two (2) driveways shall be used for each one hundred (100) feet or fraction thereof of frontage on any street. 2. No two (2) of said driveways shall be closer to each other than six (6) feet, and no driveway shall be closer to a side property line than three (3) feet. 3. Each driveway shall be a minimum of 25 feet wide and not more than fifty (50) feet wide, measured at right angles to the centerline of the driveway, except as increased by permissible curb return radii. The entire flare of any return radius shall fall within the rightof-way. 4. See Kanab City Design and Construction Standards to determine the distance a driveway shall be from an intersection or intersecting road. 5. In all cases where there is an existing curb and gutter or sidewalk on the street, the applicant for a permit shall provide a safety island along the entire frontage of the property, except for the permitted driveways. On the two (2) ends and street side of each such island shall be constructed a concrete curb, the height, location, and structural specifications of which shall be in accordance with the City of Kanab Design and Construction Standards. 6. Where there is no existing curb and gutter or sidewalk, the applicant may at his option install such safety island and curb, or, in place thereof shall construct along the entire length of the property line (except in front of the permitted driveways) a curb, fence, or pipe rail not exceeding two (2) feet or less than eight (8) inches in height. 7. All other uses not listed above as determined by the Kanab City Planning Commission, based on the nearest compatible use standards.

6-4 Numbers of Parking Spaces · 6-6 Location of Gasoline Pumps

Ask a broker about Kanab zoning, free

CallTextFree summary