12-1600.11 STREET AND ROAD STANDARDS
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Marysvale code is at https://marysvale.gov/wp-content/uploads/2024/12/dec-15-2024-Full-section-12-Ordinance.pdf.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Marysvale planning before you rely on it.
All streets and street and roads in a subdivision shall meet the minimum standards of Marysvale Town, in addition to the following:
1.
Subdivision improvement plans shall be required for all proposed streets
and roads.
2.
Streets and roads must have at least 6 inches of pit run rock and 3 inches of
gravel.
3.
Streets and roads shall meet the minimum standard of the existing street or
road they are connecting to, in addition to the requirements of this
ordinance.
4.
All streets and roads must be graded and drained with adequate crowning,
pipe culverts, and barrow ditches.
5.
All drainage and improvements must be accepted by the Town.
6.
These standards are the minimum required, and in some cases may be
enhanced.
7. Each road proposal shall be reviewed, inspected, and approved by the
Town before any building permit is issued
12-1600.10 LOT STANDARDS · 12-1600.12 PLANNED UNIT DEVELOPMENTS