12-1600.13 STREET AND ROAD IMPROVEMENTS
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Marysvale code is at https://marysvale.gov/wp-content/uploads/2024/12/dec-15-2024-Full-section-12-Ordinance.pdf.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Marysvale planning before you rely on it.
1.
Minimum Standards. Streets and street and roads shall be designed and
built to the minimum standards of the Town and the Wildland Urban
Interface Code. The designing engineer shall certify in writing that the
minimum standards have been met prior to any site work or issuance of
any building permits in the subdivision.
2.
Lot Frontage. An application to subdivide lands shall not be considered
unless all proposed lots and other areas to be subdivided have adequate
frontage, either by minimum widths or appropriate accesses as required by
this ordinance and the zoning ordinance. All lots in a proposed subdivision
shall be accessed on a private or public street and road improved to the
minimum standards of this ordinance.
3.
Rights of Way. Marysvale Town street and roadways shall have the
following minimum right of way widths:
STREET AND ROAD TYPE
MINIMUM WIDTH
Major Collector
100 feet
Minor Collector
66 feet
Collector Street and road
66 feet
Major Street and road
66 feet
Minor or Frontage Street and road
66 feet
Private Street and road
32 feet
4.
Effective 5/3/2023
10-9a-508. Easements. Easements shall follow lot lines whenever
practical and shall have a minimum width of 20 feet apportioned equally in
abutting properties except where the grade or terrain may require additional
space for utilities or maintenance of the easement.
5.
Flag Lots. Flag lots shall be prohibited for any new subdivision
developments.
6.
Intersections. Streets and street and roads shall intersect at 90-degree
angles and no more than 4 streets and street and roads shall enter any
intersection.
7.
Grades. No street and road shall exceed an 8% grade unless specifically
approved by the Town and certified by a licensed engineer.
8.
Signage. Street and road name signs shall be required and shall be installed
by the applicant. Signage shall conform to the minimum standards of the
Town and provided where necessary for proper identification of all streets
and street and roads.
9.
Dedication and Acceptance.
A. The applicant shall identify public streets and street and roads and
improvements that are to be transferred to public ownership on the
subdivision plat or other recordable document. Dedication shall not
occur until widths, alignments, location and design features of the
proposed rights of way are approved by the Town.
B. The applicant shall bring public street and roadways and other
improvements to the minimum standards of the Town and maintain
them in that condition for a period of 1 year before maintenance as
public facility may be requested. Only after inspection and
approval shall the Town accept the facilities for public
maintenance.
C. Town services shall not be provided to the subdivision until maintenance responsibility for the public improvements is accepted, and the facilities are formally dedicated to the Town.
D. In the event the Town does not accept maintenance responsibility of the proposed public improvements, the applicant shall be so advised in writing by the Town stating the reason for the rejection or necessary corrective actions. If the needed corrections are not made within a reasonable time, as so stated in the notice, the Town may have the improvements completed and paid for out of the security deposits for the subdivision.
12-1600.12.5 Open Space · 12-1600.14 SOURCE AND SUPPLY OF POTABLE DRINKING WATER