104-19-4 Site Development Standards
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Ogden Valley City code is at https://ogdenvalley.gov/municipal-code-2/.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Ogden Valley City planning before you rely on it.
The following site development standards apply to the Residential Manufactured Home Zone RMH-1-6:
a. Minimum area: Four acres for manufactured home subdivision. b. Minimum lot size: 6,000 square feet for interior lots; 7,000 square feet for corner lots. c. Minimum lot width: 60 feet for interior lots. 70 feet for corner lots. d. Minimum yard setbacks.
1. Front: 15 feet, except for lots on the periphery of a manufactured home subdivision abutting a different land use. In such cases, a greater setback may be required as part of the conditional use permit review of the subdivision.
2. Side: a. Manufactured home: five feet each side, from property line to support post of awning ten feet from property line to side of manufactured home. For lots on the periphery of a manufactured subdivision abutting a different land use a greater setback may be required as part of conditional use permit review. b. Accessory building: five feet.
3. Side facing street on corner lot: 15 feet. 4. Rear:
a. Manufactured home: 15 feet. b. Accessory building: one foot except five feet where accessory
building rears on side yard of adjacent lot. e. Lot coverage. No main structure or accessory structures shall cover more than 60
percent of the lot area. f. Main building height.
1. Minimum: one story. 2. Maximum: one story or 14 feet. g. Accessory building height: 25 feet, unless meeting requirements of section 108-7-16, Large accessory buildings.