18.09.050 Housing Standards
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Pleasant View code is at https://www.pleasantviewut.gov/213/Municipal-Code.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Pleasant View planning before you rely on it.
A. Building Height. 1. Minimum shall be one story or ten feet (10’). 2. Maximum shall be two and one-half stories or thirty-five feet (35’). B. Single family homes shall incorporate the following: 1. A minimum of 50% of each structure’s exterior surface as masonry (brick, stone or stucco.) 2. A minimum of a 2 car garage is required. 3. Roof materials shall be constructed of architectural shingles that simulated the depth of wood shingles or may be constructed of tile or other materials approved by the Planning Commission. 4. Minimum 5:12 roof pitch. 5. No more than 2 homes with the same or very similar architecture shall be allowed adjacent to each other. 6. All homes shall have a minimum finished square footage of 1500 above grade with at least 800 square feet per floor. (Ord.2022-14, dated 5/24/22; prior codes: Ord.
2008-16 dated 11/21/08; prior codes see below)
18.09.040 Site Development Standards · 18.09.060 Qualifying Medium Density Standards