18.43.110 Areas
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Pleasant View code is at https://www.pleasantviewut.gov/213/Municipal-Code.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Pleasant View planning before you rely on it.
A. It is intended that land uses are compatible with each other and with adjacent land uses.
Each area has differing use and design requirements based on the specific area. B. All areas are required to meet the general provisions unless otherwise indicated in the area
requirements or if specifically determined by the city. Non residential uses outside of the areas indicated shall be required to incorporate appropriate elements of these requirements, as determined by the City.
C. The generally acceptable uses as listed in the indicated areas is intended to supplement the various zones. It is recognized that some of the existing uses are incompatible with the acceptable uses.
D. The specific areas are shown on the General Plan Map and are approximately as described in the area sections. Where such areas overlap with Gateway Areas, Gateway standards shall apply. (Ord. 2010-15, dated 5/25/10)