13.24.140 DESIGN STANDARDS: Easement Standards
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Sanpete County code is at https://www.sanpetecountyutah.gov/174/Planning-Zoning.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Sanpete County planning before you rely on it.
1. Easements shall follow lot lines and shall have a minimum total width of the set back established in the specific zone. 14.24.050 Table of development Standards, in abutting properties.
2. Where front-line easements are required, a minimum of ten (10) feet shall be allocated as a utility easement. Perimeter easements shall be not less than fifteen (15) feet in width, extending throughout the peripheral area of the development, if required by the Land Use Authority
3. All easements shall be designed so as to provide efficient installation of utilities or street planning. Special guying easements at corners may be required. Public utility installations shall be so located as to permit multiple installations within the easements. The developer shall establish final utility grades prior to utility installations.
4. There shall be no permanent structures located on or over easements without written approval of the Zoning Administrator and the utility for which the easement is provided.
13.24.130 DESIGN STANDARDS: Lot Size Standards · 13.24.150 DESIGN STANDARDS: Utilities to be Underground