14.44.020 SENSITIVE LANDS ZONE (SL): Table Of Standards - Sensitive Lands Zone (SL)
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Sanpete County code is at https://www.sanpetecountyutah.gov/174/Planning-Zoning.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Sanpete County planning before you rely on it.
Standards Density (See example below)
Requirements 40 Acre (1 unit per / 40 acres)
Reference Section 14.76.040
Percent Built Area (PBA)
25%
Section 14.76.050
Lot Minimum
Setbacks Front Side Rear
Frontage
5 Acre
66' (From the center of the road or 30' from the property line; whichever is
greater.)
30' 30'
200'
Section 14.76.240 & Section 14.76.250
Maximum Height
None
Animal Units
No restrictions.
Section 14.12.020
Height of solid fences or other solid 3' Maximum height. structures within front setback*
Permitted/Conditional Uses
(See Land Use Matrix)
Section 14.12.020 Section 14.26.010
* Note: This applies to areas associated with the platted lot of a residential unit that has been approved and does not apply to areas where a greenbelt application and other agricultural related activities. **Note: Any parcel recorded before October 6, 1981 and, for development purposes, meets each of the development conditions specified within this code, may be used for residential purposes. ****Additional Standards (See Chapter 14.76) ****
Example: 50 Acres {Density - (50/40 = 1) 1 building lot} {PBA - (50 X 25% = 12.5) or 12.5 Acres} This means you may develop a maximum of 1 building lot on no more than 25% of 50 Acres (12.5 Acres)
14.44.010 SENSITIVE LANDS ZONE (SL): Purpose · 14.48.010 PUBLIC FACILITIES ZONE (PF): Purpose