19.09.06 Dimensions for Parking Stalls
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Saratoga Springs code is at https://www.saratogasprings-ut.gov/202/Land-Development-Code.
Text pulled 2026-10-19 from this source.
The city's use tables are images in its PDFs, so they appear nearly empty here. Check the official code for any use table.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Saratoga Springs planning before you rely on it.
The standards in this Section shall apply to all parking areas unless otherwise noted. The dimensions of parking stalls and aisles contained within the parking areas shall be dependent upon the orientation of stalls.
Parking Angle
Parallel 45 60 90
Dimensions for Parking Stalls and Aisle
Stall Width Stall Length Aisle Width
(two-way
traffic)
9’
20’
N/A
9’
18’
25’
9’
18’
25’
9’
18’
24’
Aisle Width (one-way traffic) 12’ 14’ 18’ 24’
19.09.05 Parking Requirements and Shared Parking · 19.09.07 Accessible Parking