1.13.8 Standards for Review
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Wallsburg code is at https://wallsburg.gov/development-code/.
Text pulled 2026-10-19 from this source.
The chapters the town posts pre-date revisions it approved in June 2023, September 2023 and February 2024, which aren't posted as clean text. Check those changes with the town.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Wallsburg planning before you rely on it.
No building permits shall be issued on buildings and structures subject to infrastructure review unless it is found by the Town that there is sufficient infrastructure capacity, according to the standards adopted by the Town. Specific review items include: delivery of adequate water for culinary and fire flow purposes, safe vehicular and pedestrian access for owners, users and emergency vehicles, and proper handling of storm drainage and slope preservation. The standards to be applied for review are:
1. The standards for adequate delivery of water shall be as applicable: the Wasatch County Fire District Flow Standards, the Wallsburg Design Standards, Construction Specifications and Standard Drawings, and the County and/or State Department of Health Drinking Water Regulations as now constituted and as may be amended.
2. The standards for adequate site drainage are the Uniform Building Code Chapter 70, as adopted by ordinance, and the Wallsburg Design Standards, Construction Specifications and Standard Drawings as now constituted or as may be adopted or amended.
3. The standards for access to the building or structure are the Uniform Fire Code adopted by ordinance, the Streets Master Plan or Land Use Map, the Wallsburg Trails Master Plan, and the Wallsburg Design Standards, Construction Specifications and Standard Drawings as now constituted or as may be adopted or amended.
4. The standards for slope retention are the Uniform Building Code Chapter 70, as adopted by ordinance and the Wallsburg Design Standards, Construction Specifications and Standard Drawings as now constituted or as may be amended.