3.11.2.2 Roof Mounted Antenna
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Wallsburg code is at https://wallsburg.gov/development-code/.
Text pulled 2026-10-19 from this source.
The chapters the town posts pre-date revisions it approved in June 2023, September 2023 and February 2024, which aren't posted as clean text. Check those changes with the town.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Wallsburg planning before you rely on it.
An antenna or series of antennas mounted on the roof, mechanical room, or penthouse of a building or structure is a permitted use in all industrial zones and on Town owned property, and a conditional use in the commercial and manufacturing zones. Any roof mounted antenna shall comply with the following standards:
1. Roof mounted antennas may only be erected on buildings or structures with a flat roof and shall be screened, constructed and/or colored to match the structure on which they are located.
2. Antennas must be setback from the edge of the structure no less than one (1) foot for every one (1) foot of vertical antenna height to a maximum height of ten (10) feet. In no case shall a roof mounted antenna be located closer than five (5) feet from the edge of the structure on which it is erected.
3. If any associated equipment is located on the ground, it shall be enclosed by a sight obscuring fence and landscaped to match the surrounding landscaping or to the satisfaction of the Planning Commission.
4. The owner of any structure on which a roof mounted antenna is located must, in person or in writing, agree to all conditions of approval including the removal of a vacated antenna.
3.11.2.1 Wall Mounted Antenna · 3.11.2.3 Monopole Structures Less Than Two (2) Feet in Width