5.6.11 Development Standards for Sever Constrained Lands
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Wallsburg code is at https://wallsburg.gov/development-code/.
Text pulled 2026-10-19 from this source.
The chapters the town posts pre-date revisions it approved in June 2023, September 2023 and February 2024, which aren't posted as clean text. Check those changes with the town.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Wallsburg planning before you rely on it.
A. Severe Constraint Lands are extremely sensitive to development, grading, filling, or vegetation removal and, whenever possible, alternative development should be considered.
B. Development of floodways is not permitted except for bridges and road crossings. Such crossings shall be designed to pass the one hundred year flood without raising the upstream flood height more than six inches.
C. New structures are not allowed on Severe Constraints Lands.
D. Other development of land or approval for a planning action shall be allowed only when the following study has been accomplished. An engineering geologic study approved by the Wallsburg’s Public Works Director and Planning Director establishes that the site is stable for the proposed use and development. The study shall include the following:
1. Index map.
2. Project description to include location, topography, drainage, vegetation, and discussion of previous work and discussion of field exploration methods.
3. Site geology, based on a surficial survey, to include site geologic maps, description of bedrock and surficial materials, including artificial fill, locations of any faults, folds, etc., and structural data including bedding, jointing and shear zones, soil depth and soil structure.
4. Discussion of any off-site geologic conditions that may pose a potential hazard to the site, or that may be affected by on-site development.
5. Suitability of site for proposed development from a geologic standpoint.
6. Specific recommendations for cut slope stability, seepage and drainage control or other design criteria to mitigate geologic hazards.
7. If deemed necessary by the engineer or geologist to establish whether an area to be affected by the proposed development is stable, additional studies and supportive data shall include crosssections showing subsurface structure, graphic logs with subsurface exploration, results of laboratory test and references.
8. Signature and registration number of the engineer and/or geologist.
9. Additional information or analyses as necessary to evaluate the site.
5.6.10 Development Standards for Wildfire Lands · 5.6.12 Conservation Subdivision Design