Zoning 1624 Clear View Area Requirements
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Wayne County code is at https://waynecountyutah.gov/pages/planning-and-zoning.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Wayne County planning before you rely on it.
1) Street Intersections/Corner Lot. In all required front yard setback areas, no obstruction to view in excess of three (3) feet in height, or four (4) feet in height for a non view-obstructing
fence, shall be placed on any corner lot within a triangular area formed by the street or road
right-of way lines and a line connecting them at points twenty (20) feet from the intersection
of the street or road right-of-way lines (see Figure
).
2) Major Roads. The clear view area on major roads shall be the triangular area shall be formed by the property lines and a line connecting them at points twenty (20) feet from the intersection of the property lines (see Figure ).
3) Driveways. The clear view area for a driveway shall be the triangle formed by the driveway lines and the road or street right-of-way line and a line connecting them at points fifteen (15) feet from the intersection of the driveway line and road or street right-of-way line.
4) Modification of Clear View Area. A modification of the clear view areas may be made by the Land Use Authority, as applicable. The Land Use Authority is authorized to increase or decrease the required clear view area if it is determined that there is a valid public safety reason to increase or decrease the required clear-view area.
Zoning 1623 Effect of Official Streets Map · Zoning 1625 Maximum and Minimum Height of All Buildings