Utah Zoning

Team Utah Commercial · brokered by RE/MAX Associates · not a government website

Call 801-664-3370

Wendover zoning code

10-4-28 NEW DWELLINGS CONSTRUCTED ON-SITE OR MANUFACTURED OFF-SITE

Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build. The official Wendover code is at https://wendovercityutah.com/planning-%26-zoning. Text pulled 2026-10-19 from this source. Tables (like use tables) may not copy cleanly, so check any table against the official code. Confirm anything here with Wendover planning before you rely on it.
1. Construction of dwellings shall comply with all applicable regulations in effect in Wendover City, be constructed on a legal lot in a zone which permits the residential facility and obtain the appropriate building permit. A certificate of occupancy is required and will be issued upon finding that the residential facility has complied with the controlling regulations. 2. New construction of dwellings on site shall meet the requirements of the Building Code as adopted by the State of Utah, and be inspected by the local Building Official. Additions, alterations, foundations, and accessory buildings require building permits. 3. New dwellings constructed or manufactured off-site in a “factory” must be certified to be in compliance with the International Building Code or the National Manufactured Housing Construction and Safety Standards Act of 1974 and bear the approved U. S. Department of Housing and Urban Development approved (HUD) insignia. The HUD insignia may not be removed from its original location on the structure nor any unapproved modification made to the structure without approval of Wendover City. Installation of an off-site manufactured residential facility that is designed to meet Building Code requirements shall be permanent and comply with the Building Code as adopted by the State of Utah for component assemblies. The installation shall be designed to meet seismic and wind load requirements. A copy of the calculations shall become part of the building permit application. 4. Installation of the off-site manufactured residential facility constructed to meet HUD requirements and bears the HUD insignia shall comply with the authorized “installation manual” which accompanies the unit from the factory. The installation shall be designed to meet seismic and wind load requirements. A copy of the calculations shall become part of the building permit application. The residential facility shall be permanently installed on an approved foundation, which is constructed according to the HUD installation manual or the International Building Code (IBC).

10-4-27 STORAGE SPACE REQUIRED FOR DWELLING · 10-4-29 PREVIOUSLY USED AND OLDER DWELLINGS

Ask a broker about Wendover zoning, free

CallTextFree summary