17.26.050 AREA, SETBACK AND HEIGHT REQUIREMENTS
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Millville code is at https://millvilleut.gov/city-government/citycode/.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Millville planning before you rely on it.
A. Yard Requirements: The minimum yard requirements for all main and accessory buildings are as follows: 1. Front yard: Thirty feet (30');
2. Side yard:
a. Thirty feet (30') if adjacent to a residential or agricultural zone or facing a street,
b. No minimum side setback required when abutting other commercial property;
3. Rear yard:
a. Thirty feet (30’) if adjacent to a residential or agricultural zone, or facing a street,
b. Twenty feet (20’) if adjacent to other property zoned as commercial.
B. Building Height: The maximum height of a building or structure shall be fifty feet (50') unless the proposed building or structure is within two hundred feet (200’) of an existing Residential Zone in which case the maximum height of a building or structure shall be thirty five feet (35’). The planning commission may reduce the height allowed at locations where a reduction in height is necessary to minimize the impact on surrounding land uses.
C. Lot Corners: Lot corners will be marked with five-eighths inch (5/8") rebar (#5 rebar) that is eighteen (18) to twenty four inches (24") long, capped with the surveyor's red cap containing the surveyor's name or license number driven down to ground level. (Ord. 2020-1, 2020: Ord. 2014-3, 2014: Ord. 2013-2, 2013: Ord. 2012-4, 2012)
17.26.040 APPLICATION REQUIREMENTS · 17.26.060 SPECIAL PROVISIONS