17.18.030 Lots 1
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Pleasant View code is at https://www.pleasantviewut.gov/213/Municipal-Code.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Pleasant View planning before you rely on it.
Lot Arrangement and Design: a. The lot arrangement and design shall be such that lots will provide satisfactory and desirable sites for buildings and be properly related to topography and to existing and future development. b. Reasonable access shall be provided to each lot. c. Lots shall be arranged, whenever possible, such that access is to a local/ residential road. d. Unless restrained by topography, access for corner lots shall be onto the road of lesser classification. e. Lots shall generally be rectangularly shaped with four (4) sides. Irregularly shaped lots are discouraged. Where lots are irregularly shaped, side and rear yard lines shall be defined on the subdivision plat. 2. Compliance with Zoning Ordinance: All lots shown on the subdivision plat must
comply with requirements of the Zoning Ordinance. 3. Abut on Public or Private Street: Each lot shall abut on a public street or
private street dedicated by the subdivision plat or an existing publicly dedicated street. Interior lots having frontage on two (2) streets shall be prohibited unless specifically determined by the Approval Authority that such design is the most appropriate use of the property, would not create any additional nuisance or hazardous conditions, and vehicular access to one (1) of the streets (except for commercial or industrial uses), as determined by the City, is prohibited as recorded on the plat.
4. Side Lines: Side lines of lots shall be approximately at right angles, or radial to the street line for not less than the front yard setback distance. Special exceptions may be made by the DRC if justified by topography, hazards, or other physical constraint(s).
5. Remnants: All remnants of parcels or lots below the minimum size required in the zone, leftover after subdividing a larger tract, must be added to adjacent lots, rather
than allowed to remain as unusable parcels. 6. Flag Lots: Flag lots are not allowed. 7. Skyline Drive: No new lots shall access Skyline Drive (4300 N) between 900
West and Pleasant View Drive unless no other physical option remains, as determined by the DRC.
8. Corner Lots: For all corner lots, a no-access line shall be shown on the plat along the street rights-of-way for a distance of the lesser of one-half of the frontage or fifty (50) feet, beginning at the apparent intersection of the right-of-way lines. (Ord.202610, dated 5/12/26; prior codes: Ord.2022-8, dated 3/8/22 and Ord.2008-5, dated 4/8/08)
17.18.020 Streets, Cul-de-Sacs, Alleys, Trails, and Easements 1 · 17.18.040 Blocks 1