17.18.040 Blocks 1
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Pleasant View code is at https://www.pleasantviewut.gov/213/Municipal-Code.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Pleasant View planning before you rely on it.
The maximum length of blocks generally shall be 1,300 feet, and the minimum
length of blocks shall be 500 feet. Greater block lengths may be permitted when topography prohibits such, as determined by the DRC. Blocks over 800 feet in length may, at the discretion of the City, be required or approved with a dedicated walkway through the block at approximately the center of the block. Such walkway shall not be less than ten (10) feet in width.
2. The width of blocks shall be sufficient to allow two (2) tiers of lots or as otherwise approved by the City because of design, terrain, or other unusual conditions.
3. Blocks intended for business or industrial use shall be designed specifically for such purposes with adequate space set aside for off-street parking and delivery facilities. (Ord.2026-10, dated 5/12/26; prior code: Ord.2008-5, dated 4/8/08)