18.24.650 Lot Standards
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Pleasant View code is at https://www.pleasantviewut.gov/213/Municipal-Code.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Pleasant View planning before you rely on it.
Each mobile home lot shall contain a minimum area of three thousand square
feet with a minimum width of fifty feet fronting on a driveway; provided, that: A. Lots larger than the above minimum sizes may be required where it is determined that the lot
size will be consistent with the general pattern established by mobile home parks in the vicinity, or be necessary to accommodate mobile home sizes as stated in the mobile home park preliminary plans submitted.
B. Lots on curved driveways or cul-de-sacs where lot lines are either converging or diverging from the front to the rear of the lot shall have an average width of at least thirty feet, but in no case shall the frontage on a driveway be less than twenty-five feet. In no case may density in the mobile home park exceed seven mobile homes per acre. (Ord.2010-6, dated 3/9/10; prior codes: Ord. 87-17.03 (part), 1987 and §34-8A-8-1)
18.24.640 Recreation Requirements · 18.24.660 Separation of Mobile Homes