18.36.060 Lot Area Regulations
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Pleasant View code is at https://www.pleasantviewut.gov/213/Municipal-Code.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Pleasant View planning before you rely on it.
A. The location of all structures shall be as shown on the approved final development plan.
The proposed location and arrangement of structures shall not be detrimental to existing or prospective development of the neighborhood. There shall be no minimum setback lines and no minimum yard widths. The spacing between each main building shall have a side yard equivalent to the smallest of the two side yard requirements provided for in the corresponding RE-20 zone
and no building shall exceed thirty-five feet in height with a maximum height of two and one-half stories.
B. There shall not be a maximum percentage of lot coverage required for main buildings and accessory uses. However, a minimum of fifty percent of the area required for the planned residential unit development shall be required to remain in open green space available for the common use and enjoyment of the residents and their guests. Not more than twenty percent of the total land area may be hard surfaced for roads and parking.
C. The periphery development of the planned residential unit development shall be subject to the applicable width, yard and height regulations of the abutting zones. (Ord. 87-17.03 (part), 1987: prior code §34-13A-6)