18.43.390 Roof Treatments
Unofficial copy. It may be out of date. Not legal or zoning advice. Zoning rules change, and only the city or county can say for sure what is allowed on a property. Confirm with the city or county planning department before you buy, sign or build.
The official Pleasant View code is at https://www.pleasantviewut.gov/213/Municipal-Code.
Text pulled 2026-10-19 from this source.
Tables (like use tables) may not copy cleanly, so check any table against the official code.
Confirm anything here with Pleasant View planning before you rely on it.
A. All roofs on commercial buildings shall meet at least two of the following requirements: 1. A three-dimensional cornice treatment along all facades, a minimum of twelve inches
high, having a variety of thickness in relief. 2. Roof overhangs on at least the primary facade that extend at least three feet beyond
the supporting walls. 3. A sloping roof, such as a gable, hip or mansard, that does not exceed the average
height of the supporting walls, with an average pitch of 4:12 or greater. 4. For sloping roofs, two or more roof planes on the primary facade. 5. Roof projections such as cupolas, clock towers or bell towers. 6. On flat roofs, decorative parapets along primary and secondary facades that are at
least three feet in height above the finished roof, or that are high enough to block the view of any mechanical equipment, are required for all buildings. B. Any mechanical equipment is required to be screened from view on all buildings. C. Where pitched roofs are used, the eaves or roof edges must be setback at least five feet from any public sidewalk not inside the overhang. D. All colors, roof treatments and materials selected must be of superior quality, in keeping with the intent of these requirements. All materials and colors must be submitted by the applicant for review and consideration by the city. (Ord. 2010-15, dated 5/25/10)
Article IV Gateway West Area